Dashboard purpose
ダッシュボードの目的
Presenting Browsi’s added value for lite implementations - including uplift for the main KPIs.
主なKPIのupliftを含む、ライトの実装に対するBrowsiの付加価値を提示。The dashboard presents comparison of performance for the selected site including Browsi performance vs “without Browsi” performance (which excludes performance for: publisher refreshed placements (by Browsi) and Browsi placements).
ダッシュボードは、Browsiのパフォーマンスと "Browsiなし "のパフォーマンス(パブリッシャーがリフレッシュしたプレースメント(Browsiによる)とBrowsiプレースメントのパフォーマンスを除く)を含む、選択したサイトのパフォーマンスの比較を表示します。
How to use
使用方法
Select the desired filters on the top selection bar, and apply selections. You can also select a specific unit to observe performance per specific unit.
上部の選択バーで必要なフィルターを選択し、選択を適用する。また、特定のユニットを選択して、特定のユニットごとのパフォーマンスを観察することもできます。
Below the filters bar, you can see the uplifts generated by the utilized Browsi features in various KPIs
フィルターバーの下には、様々なKPIで利用されたBrowsiの機能によって生み出されたupliftを見ることができます。
...
3. RPM uplift through time, per another chosen metric: 別の指標によれば、RPMは時間と共に上昇する:
...
...
データソース
Pageviews - measured by Browsi (affects RPM and ads per page calculation)Pageviews - Browsiによる測定(RPMとページあたりの広告計算に影響する)Ad requests, impressions, viewed impressions, clicks, and revenue - measured by Publisher’s GAM.
Ad requests, impressions, viewed impressions, clicks, and revenue - パブリッシャーのGAMで測定
Data requirements and explanations
データ要件と説明
Browsi TrafficThe dashboard presents the uplift generated by Browsi incremental placements and refresh across all pages.
ダッシュボードは、すべてのページにおけるBrowsiの増分プレースメントとリフレッシュによって生成されたupliftを表示します。
Warning |
---|
If Browsi is not implemented on 100% of the pages, the uplift will be inaccurate, due to a smaller portion of monetized pages by Browsi. Browsiが100%のページに実装されていない場合、Browsiによって収益化されたページの割合が少ないため、upliftは不正確になります。 |
Units
Lite dashboard is available after including all units of pages that are monetized by Browsi to the data extraction process (this ensures presenting data for all relevant units in the scope of the test).
Lite dashboardは、Browsiがマネタイズしているすべてのページ単位をデータ抽出プロセスに含めた後に利用できる(これにより、テスト範囲内の関連するすべての単位のデータを確実に提示することができる)。
It is important to include only in-scope units, so irrelevant units will not skew the performance.
対象範囲内のユニットだけを含めることが重要であり、無関係なユニットが成績に影響を与えないようにする。
In case an ad units' name is changed for any reason, the new ad unit must be added as well to the list of in-scope units in order to be reflected on the dashboard’s performance.
何らかの理由で広告ユニット名が変更された場合、ダッシュボードのパフォーマンスに反映させるためには、新しい広告ユニットも対象ユニットのリストに追加する必要があります。
If ad units are served across the site, but the scope of the test is only one or few sections, the data will be skewed.
広告ユニットがサイト全体に配信されているにもかかわらず、テストの範囲が1つまたはいくつかのセクションのみである場合、データは歪むことになる。
Required Key values
...
BrowsiId key will be set up on GAM for all Browsi slots in order to reflect the performance generated by Browsi.
...
BrowsiIdキーは、Browsiによって生成されたパフォーマンスを反映させるために、すべてのBrowsiスロットに対してGAMに設定される。
...
As part of lite implementation, Browsi can refresh publisher’s placements.
For each slot that is refreshed by Browsi, a key-value will be sent on the refreshed impression called “browsiRefresh = pubtrue”. So, publisher should create browsiRefresh key on GAM, and set the value pubtrue.
Browsiが100%のページに実装されていない場合、Browsiによって収益化されたページの割合が少ないため、upliftは不正確になります。 |
ユニット
Lite dashboardは、Browsiがマネタイズしているすべてのページ単位をデータ抽出プロセスに含めた後に利用できる(これにより、テスト範囲内の関連するすべての単位のデータを確実に提示することができる)。
対象範囲内のユニットだけを含めることが重要であり、無関係なユニットが成績に影響を与えないようにする。
何らかの理由で広告ユニット名が変更された場合、ダッシュボードのパフォーマンスに反映させるためには、新しい広告ユニットも対象ユニットのリストに追加する必要があります。
広告ユニットがサイト全体に配信されているにもかかわらず、テストの範囲が1つまたはいくつかのセクションのみである場合、データは歪むことになる。
Key Valueのリクエスト
BrowsiIdキーは、Browsiによって生成されたパフォーマンスを反映させるために、すべてのBrowsiスロットに対してGAMに設定される。
ライト実装の一部として、Browsiはパブリッシャーのプレースメントをリフレッシュすることができます。Browsiによってリフレッシュされた各スロットに対して、リフレッシュされたインプレッションで "browsiRefresh = pubtrue "というkey-valueが送信されます。そのため、パブリッシャーはGAM上にbrowsiRefreshキーを作成し、pubtrueという値を設定する必要があります。
GAM Permissions
Publisher should allow Browsi to view all of the units, so the dashboard will reflect the performance for all units that are part of the test.
...
というKey Valueが送信されます。そのため、パブリッシャーはGAM上にbrowsiRefreshキーを作成し、pubtrueという値を設定する必要があります。
GAMの許可
パブリッシャーは、Browsiがすべてのユニットを表示できるようにし、ダッシュボードにテストの一部であるすべてのユニットのパフォーマンスが反映されるようにします。